Friday, January 29, 2010

Modification in Passenger Buses for convenience and comfort of Passengers:

AIM: To reduce the inconvenience caused for the passengers due to bus travel by modifying a simple UD (ULTRA DELUX) bus.

Total Seats:

For 40seats:

· Left: 20

· Right: 20

Sleepers (12 nos.):

· Left: 6

· Right: 6

Modification: The position of the passenger seats are rotated to 180°, i.e. the seats are placed opposite to the driving seats or opposite to the motion of bus and adding 6+6 sleepers(12 sleepers) and placing the luggage carrier below the passenger’s seat by raising the seat to specific dimensions.


1. The Inconvenience caused to the passengers during Sudden Pressing of Brakes can be removed because the force caused due to the brake can be cancelled by the push-back of the seats.

2. During night travel, the Light ray falling on the passengers by the Head-Light of opposite vehicle can be avoided.

Submitted by,



Wednesday, December 9, 2009


Motorcycle chain maintenance, along with oil changes and tyre maintenance is a crucial part of safe riding. A four stroke motorcycle (E.g.: Boxer CT) requires one litre of engine oil for every thousand kilometres and vehicles like TVS Excel requires four hundred millilitres of engine oil for thousand kilometres. Due to laziness of riders and cost criteria, the oil change is not done for the vehicles. If the same oil is used for longer time, the oil will lose its viscosity due to high temperature inside the oil sump. Due to loss of viscosity, the oil become black in colour and loses its elasticity and leads to rapid wear of moving parts. Due to these reasons, the tooth of the chain may lose its sharpness and create noise. To reduce thins problem, a cylindrical container made of Aluminium1100 (UNS No: A91100) which can withstand high temperature can be used to hold the oil externally which pumps the oil inside the oil sump by using the Automatic Timer. The used or low viscosity oil can be drained through an outlet separately (made of ordinary metal or plastic). The timer is used to pump in and drain out the oil for every thousand kilometres. The external fitting of this container is useful for the riders to refill the oil and to reduce oil service cost of the vehicle. Three different designs of the container can be made for different vehicles which can be fitted near the tool or first aid box of the motorcycle.

Submitted by




Date of birth:
November 24, 1990

Studying B.Tech (Mechanical) at SASTRA University, Tanjore.

Additional Qualification:
a) Foundation Pro/E in CADD Center, Tanjore
b) Foundation Auto CADD in CADD Center,Tambaram, Chennai.
c) Advanced Diploma in Computer Hardware & Networking, Iect SISI, Tambaram, Chennai.

Implant Training Undergone: from 1st DEC to 12th DEC 2009 in DELPHI-TVS Diesel Systems Ltd, Mannur.

Workshops attended:
1. Workshop on robotics conducted by TRI India(P) Ltd – Excavator Kit 2.Workshop on autonomous robotics and CryptoGraphy by IIT, Kharagpur in SRM University
3. Workshop on Engine assembling conducted
By SASTRA University
4. Autonomous Robotics- Line Follower Robots conducted by ROBOTICS CORE SCHOOL in association with ROBOTICS CLUB @ SASTRA University.